|
|
Om F-scantF-scanMed denna metod kan du både diagnostisera (undersöka) din kropp och behandla.
Vilka är fördelarna med den nya diagnostiken? Varför är den så populär?
Technology OverviewThe F-Scan is a contact pad device with a difference. It has the capability of scanning the body to detect frequencies that resonate. The F-Scan can then apply the frequencies directly to the body, or it can be used do drive a Rife/Bare device or an EMEM3 type of device. For frequencies in the Hulda Clark range and above, the F-Scan is usually used as a contact pad device. For frequencies in the audio range, it is used either way. The unit puts out sine, square, and pulsed DC waves (so it is a variable frequency Clark zapper too). The output level is adjustable. I believe this is the best technology we have to determine frequencies to kill pathogens.
Highly precise frequencies with sine or rectangular wave forms are digitally synthesized. The most advanced technology is utilized and allowed to incorporate functions in our F-Scan which normally require much larger housings and which are generally much more expensive. All functions of our synthesizer are controlled by micro processors. They generate frequencies in a range from 0.01 Hz to 15,000,000 Hz. All 235 pathogens identified by Dr. CLARK (with their corresponding frequencies) are stored in permanent memory and can be utilized with ease. In addition the new F-Scan contains a table of 368 sequences of frequencies based on RIFE – readily available to treat symptoms or disorders.
To use a computer to record the results, the Windows program HyperTerminal is used. This program is part of Windows 95 and later versions. The F-Scan2 comes with instructions as to how to set up HyperTerminal and it also comes with a cord to attach the unit to an RS232 serial port.
If a computer is used, all the hits are displayed on the screen. On the screen you see the frequency, the person's conductivity, and the resonance level. If a computer is not used, hits can be seen on the F-Scan screen and then are stored in memory.
The memory holds up to 50 hits. When it is full, that series can be run, or stored in longer term memory (up to 5 sets of 50 can be saved in memory), or it can be saved as a text file, or spreadsheet file.
The F-Scan has a frequency range of 0.01 Hz to 15,000,000 Hz. It will do scans of what we usually call Rife frequencies in the range of 1-10,000 Hz. It also scans the Clark range of 60,000-800,000 Hz. Most of us have been limiting our scans to these two ranges. Some, however, have experimented with scans in the 800,000-15,000,000 Hz range with very good results.
The F-Scan comes with the F-Scan unit, the software, universal power supply, cord for a computer RS232 serial port, two gold plated hand cylinders, the finger contacts, cord for TENS type of adhesive contacts, and manual. The imprinter at the left side of the picture above is an option.
|
|
Virus kan ligga bakom prostatacancer
TANJAS KLINIK ¦ Tel.: +46 (0)36 17 46 81
Hermansvagen 94, ¦ Mobil:+46 (0)70 495 05 45
554 53 JONKOPING ¦ tanja@tanjasklinik.com
Copyright © 2006 TANJAS KLINIK. Alla rattigheter reserverade.